DM400

16" Double end trim mitre saw The DM400 uses two standard 400 Series saw heads. See 400 Series features and specifications for head details. Specifications Double end trim mitre saw 5 H.P. 3 phase Magnetic Starter 10 strokes per min Mitres up to 45° Cutting Capacity: 16" Blade Capacity: 45°: 3" X 7¾ 90°: 3" X 11" 20" Blade Capacity: 45°: 5¼" X 8" 90°:5½X11½ Blade Capacity 16" OD 406mm standard; 20" 504mm optional; saw blades not included. Arbor & Pivot 1" 25mm with 5" 127mm saw collars, spindle mounted on preloaded and sealed bearings; with V-belt drive completely enclosed; pivot uses Timken bearings lubricated for life. Motors & Voltages 5 H.P. 3 Phase 230/460 Volt Totally Enclosed Fan Cooled Motors with Magnetic Starter standard; 8½ H.P., 10 H.P., and 15 H.P. motors available as optional extra. Table Saw heads swivel from 90° to 45° toward each other with degree markings and pointer; stops are at 90° and 45°; angular adjustment of saw head away from each other available as option; other angles possible. Cutting Capacity 16" 406mm OD Blade: 90° Cutting; 3" 76mm High x 9-1/2" 241mm Wide 45°Cutting 3-1/2" 89mm High x 7" 178mm Wide 20" 504mm OD Blade: 90° Cutting 6" 152mm High x 10" 254mm Wide 45°Cutting 5-1/2" 140mm High x 8" 203mm Wide Floor Stand Heavy gage steel; 8 foot 244cm centers with traveling right hand carriage on rack and pinion; length measuring scale; optional length centers available to 40 feet 12M; digital length measurement available as optional accessory. Blade Guard Completely encloses blade in rest position; pivots up, away from base. Fences On each side of blade are keyed to base and are easily adjustable front to back. Actuation Two inside vertical clamps must be tripped by foot valve, then a two-hand anit-tie down, maintained contact safety control will work the air/hydraulic downfeed of saw heads; an air filter/regulator/lubricator with auto drain in provided; infinite speed control is provided. Air Pressure & Consumption 80 PSI 5.6 kg/cm2; 6 CFM at 80 PSI .18 cubic meters at 5.6 kg/cm2 based on 10 strokes per minute. Dust Collection Four 4" 102mm round outlets are provided, two for each saw head on DM400; 900 CFM required per head. Production Rates 10 strokes per minute; actual production rates will vary with type and width of material to be cut. Size & Weight 80" 203cm High x 54" 137cm Front to Back x 156" 397cm Long; Weight 2,500 lbs. 1,134kg.