NT-UCS18R-AS UP CUT SAW RIGHT HAND ALUMINUM SERIES

NT-UCS18R-AS UP CUT SAW RIGHT HAND ALUMINUM SERIES

orCall 239-770-4474

Description

The NT UCS18R-AS Up Cut Saw is a popular saw for cutting aluminum. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Right handed Up Cut Saws have the blade on the right side of the machine as you face the front of the machine and material is fed from the left to the right. Using a 18″ diameter blade the UCS18-AS has a capable 2″x12″ cut capacity in a small footprint making it ideal for smaller to midsize parts. The UCS series boasts some noteworthy features over competitive models with an improved dust collection system preventing the need for daily blow out under the machine and it also comes with a full length fence and backer to prevent blowout on the back side of the part. This machine also comes standard with stroke speed control, emergency stop, safety switch, guarding, foot operation, blade misting, and stroke adjustments for the blade and the top clamp making it ideal for aluminum. The UCS18 has several available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table, air/hydraulic stroke cycle, and safety interlocked cabinet doors for restricted operator access. The NT UCS18R-AS Up Cut Saw is a popular saw for cutting aluminum. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. Right handed Up Cut Saws have the blade on the right side of the machine as you face the front of the machine and material is fed from the left to the right. Using a 18″ diameter blade the UCS18-AS has a capable 2″x12″ cut capacity in a small footprint making it ideal for smaller to midsize parts. The UCS series boasts some noteworthy features over competitive models with an improved dust collection system preventing the need for daily blow out under the machine and it also comes with a full length fence and backer to prevent blowout on the back side of the part. This machine also comes standard with stroke speed control, emergency stop, safety switch, guarding, foot operation, blade misting, and stroke adjustments for the blade and the top clamp making it ideal for aluminum. The UCS18 has several available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table, air/hydraulic stroke cycle, and safety interlocked cabinet doors for restricted operator access.

Specifications

ManufacturerNorthtech Machine
ConditionNew
Main motor hp10 HP
Voltage, frequency230/460 Volt 60Hz
Phase3 Phase
Amp requirement24 / 12 Amps
Approved electrical partsCE Approved Parts
Dual voltage motors230/460 Volt 60Hz
Control voltage24 Volt
Pass-line34''
Cutting envelope1'' x 12-3/4'' 7-3/4'' x 5''
Min. working length14'' Edge of Guard to Blade
Max. working width1'' x 12-3/4'' 6-1/4'' with Clamp
Max. working thickness5''
Arbor rpm2600 RPM
Tooling18'' Tungsten Carbide Tipped
Blade size18''