NT-CS36L UP CUT SAW LEFT HAND
NT-CS36L UP CUT SAW LEFT HAND
orCall 239-770-4474
Description
The NT CS36L Up Cut Saw is the largest cross cut saw we offer. Left handed Up Cut Saws have the blade on the left side of the machine as you face the front of the machine and material is fed from the right to the left. Using a 36″ diameter blade the CS36 has an unheard of 2″x 28-3/4″ cut capacity making it the best saw for large parts. This machine comes standard with stroke speed control, emergency stop, safety interlock on blade door, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS36 has available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.
Cut Capacities:
Position 1 Rear
1” x 28-3/4”
2” x 28-1/2”
3” x 28”
4” x 27-1/2”
5” x 26-3/4”
6” x 26”
7” x 25-3/4”
8” x 25-3/8”
9” x 22”
10” x 19-1/2”
11” x 15-3/4”
12” x 10-3/4”
Position 2 Middle
1” x 26-1/2”
2” x 26-1/4”
3” x 25-11-3/4”
4” x 25-1/4
5” x 24-1/2”
6” x 23-3/4”
7” x 23”
8” x 22”
9” x 21”
10” x 20-3/4”
11” x 14-3/4”
12” x 10-1/2”
12-3/8” x 8-1/2”
Position 3 Forward
1” x 22-1/2”
2” x 22-3/4”
3” x 21-3/4”
4” x 21-1/4”
5” x 20-1/2”
6” x 19-3/4”
7” x 19”
8” x 18”
9” x 16-3/4”
10” x 15-1/4”
11” x 13-1/2”
12” x 9-1/2”
12-3/8” x 8-1/2”
The NT CS36L Up Cut Saw is the largest cross cut saw we offer. Left handed Up Cut Saws have the blade on the left side of the machine as you face the front of the machine and material is fed from the right to the left. Using a 36″ diameter blade the CS36 has an unheard of 2″x 28-3/4″ cut capacity making it the best saw for large parts. This machine comes standard with stroke speed control, emergency stop, safety interlock on blade door, guarding, foot operation and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS36 has available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access.
Cut Capacities:
Position 1 Rear
1” x 28-3/4”
2” x 28-1/2”
3” x 28”
4” x 27-1/2”
5” x 26-3/4”
6” x 26”
7” x 25-3/4”
8” x 25-3/8”
9” x 22”
10” x 19-1/2”
11” x 15-3/4”
12” x 10-3/4”
Position 2 Middle
1” x 26-1/2”
2” x 26-1/4”
3” x 25-11-3/4”
4” x 25-1/4
5” x 24-1/2”
6” x 23-3/4”
7” x 23”
8” x 22”
9” x 21”
10” x 20-3/4”
11” x 14-3/4”
12” x 10-1/2”
12-3/8” x 8-1/2”
Position 3 Forward
1” x 22-1/2”
2” x 22-3/4”
3” x 21-3/4”
4” x 21-1/4”
5” x 20-1/2”
6” x 19-3/4”
7” x 19”
8” x 18”
9” x 16-3/4”
10” x 15-1/4”
11” x 13-1/2”
12” x 9-1/2”
12-3/8” x 8-1/2”
Specifications
| Manufacturer | Northtech Machine |
| Condition | New |
| Main motor hp | 25 HP |
| Voltage, frequency | 230/460 Volt 60 Hz |
| Phase | 3 Phase |
| Amp requirement | 60 / 30 Amp |
| Approved electrical parts | CE Approved Components |
| Dual voltage motors | 230/460 Volt |
| Control voltage | 24 Volt |
| Assisted start | Wye Delta |
| Cutting envelope | 1'' x 28-3/4'', 12'' x 10-3/4'' |
| Max. working width | 28-3/4'' |
| Max. working thickness | 12-3/8'' |
| Arbor rpm | 2300 RPM |
| Blade size | 36'' Tungsten Carbide Tipped |
| No. of teeth on blade | 120 Tooth |
| Tooth spacing | 1'' |